Standart Fin

Standard FIN (version 1)

Standard Pallet FIN (1200 x 1000). GOST 9078-84

Overall dimensions: 1000 x 1200 x 145 mm

Maximum capacity: 2,500 kg

Features:

The pallet is made of square edged lumber.  The transport timber (humidity not less than 24%) or the natural moisture of any species (spruce, pine, aspen, alder) are used, corresponding to conditions 1, 2, 3 grade GOST 8486-86 or 2, Grade 3 to GOST 2695-83.

Flooring tray, which have  thickness of 22 mm, consists of seven board alternating the order of –  wide (145 mm), two narrow (100 mm) wide and two narrow and wide. The distance between the boards does not exceed 4.5 cm, length 1200 mm, length tolerances up 1/2 mm.

Three cross-board size 22 x 145 x1000 with a tolerance of 1/2 mm.

The pallet consists of the nine drafts – the extreme size of six 78 x 100 x 145 mm, an average of three 78 x 145 x 145 mm. Approvals up 1/2 mm.

The bottom boards have a thickness of 22 mm with a tolerance of 1/2 mm. The width of the two end plates 100 mm, 143 mm of the central board. All three boards are made of lower bevel to facilitate the arrival of hydraulic trolley runners, and chamfers are made on the corners of the pallet.

To build a pallet or a screw used screw nails 3,5 x 70 (for attaching the lower board and pieces, 3 pcs. On his sword), 3,5 x 90 (for fastening decking and checkers, 3 pc. on the piece), and construction nails 2,5 x 55 (for fastening deck boards to the boards bearing, 3 pcs. the connection).

FIN Standard (version 2)

Standard Pallet FIN (1200 x 1000). GOST 9078-84

Overall dimensions: 1200 x 1000 x 145 mm

Maximum capacity: 1,500 kg

Features:

The pallet is made of square edged lumber. Transport timber (humidity not less than 24%) or the natural moisture of any species (spruce, pine, aspen, alder) are used, corresponding to conditions 1, 2, 3 varieties.

Flooring tray which has a thickness of 22 mm, consists of seven board size 22 x 100 x 1200 mm.

Three cross-board size 22 x 100 x 1000 mm. The pallet is on the nine drafts size 78 x 100 x 100 mm. The size of the bottom three boards 22 x 100 x 1200 mm.

All three boards are made of lower bevel to facilitate the arrival of hydraulic trolley runners, and chamfers are made on the corners of the pallet.

To build a pallet  a screw nails 3,5 x 70 (for attaching the lower board and pieces, 3 pcs. On his sword), 3,5 x 90 (for fastening decking and checkers, 3 pcs. On checker) and construction nails 2,5 x 55 (for fastening deck boards to the boards bearing, 2 pcs. the connection) are used.

See the price list or visit our photo gallery!

15:46
Яндекс.Погода